Choosing Between Alumina and Zirconia for Technical Ceramic 3D Printing
Published: November 7, 2026 • Original report: 2026-11-04 Image via 3dceram.com Navigating Material Selection in Ceramic Additive Manufacturing In the...
Published: November 7, 2026 • Original report: 2026-11-04 Image via 3dceram.com Navigating Material Selection in Ceramic Additive Manufacturing In the...
Published: November 6, 2026 • Original report: 2026-11-03 Image via www.voxelmatters.com Revolutionizing Construction with Living Architecture Cement production remains an...
Published: September 13, 2025 • Original report: 2025-09-10 Image via www.lithoz.com Revolutionizing Hydrogen Powertrains Through Advanced Ceramic Additive Manufacturing Lithoz...
Published: November 17, 2024 • Original report: 2024-11-14 Image via www.voxelmatters.com Italian additive manufacturing pioneer WASP is set to place...
Editorial: Studio Sven pfeifferfArchitecture,BerlinBy: Admin, Studio Sven Pfeiffer The installation PRINTED TOWER in the new museum FUTURIUM in Berlin investigates...
Editorial: Minho School of Architecture, PortugalBy: Admin, AC Lab MinhoImages provided by Paulo Cruz. 'Building Digital Ceramics' exhibits a set of...
Author: DigifabTuring Edited by: Marlieke Wijnakker Co-de-iT cluster focuses on computational design, digital fabrication, robotic automation and material research, for...
Published: February 22, 2018 • Original report: 2018-02-19 Researchers at the University of Hong Kong (HKU) have pushed the...
By: Yao van den Heerik Project Sponsored by PHASE XI Germany PHASE XI is a project from the Competence Center...
Edit: Yao van den Heerik The Constitute is a Berlin based agency founded by Sebatinan Piatza and Christian Zöllner They constitute...
Author: Dana Church | Innovation Consultant at Nottingham Trent University, England, UK. Using a LUTUM XL machine The ‘design hub’...
Authors: Studio UnSeen Ljudmilla, Georgijeva, Tiia Vahula, Madis Kaasik Coauthors: Newcastle University Experimental Architecture Group. Studio UnSeen is a Tallinn...
Author: Paulo Cruz, Bruno Figueiredo The Advanced Ceramics R&D Lab is an emerging laboratory, found in 2016 and based in the Design...
A team of researchers and students from the HKU Faculty of Architecture working with Holger Kehne from Plasma Studio making...
A project by the Institute for Advanced Architecture of Catalonia and Tecnalia brings 3D printing to the Construmat fair...
Directed by: Prof. Matthias Karch with Nicolai Schlapps Researcher: Magnus Menze ROBOTIC DESIGN LAB | Master Research Project | Hello...
Source, pictures and writing: Magnus Hermansson, Nyheterna P4 Värmland Translation googletranslate, final edit, Yao vd Heerik 3D printed sculptures are exhibited in...
Z Machine is a fully mechanical Clay 3D Printer, powered by 20 kilograms of weight. The printer, driven by...
An electron microscope reveals the fine structure of the 3D-printed ceramic foam. (Image: from Minas et al, 2016, Adv. Materials)...
Digital Clay Fabrication – initial trials with the WASP Deltabot by: William Kempton, The PhD research project, a part of...
Author : Matthias Weber in colaboration with, Malcolm Mobutu Smith. Word from the editor: Matter Meddles with Math was part...
By Ronald Rael GCODE.Clay is a series of objects 3D printed in various clays (porcelain, bmix, terra-cotta, and recycled clay)...
Author: Marlieke Wijnakker Novi Limestone Printer Instead of creating more waste we have to come up with ideas to diminish...
From: steffenhartwig.de Today 3D printers are omnipresent. But most of the time they are used to print objects that already...
X-Bricks, Clay Robotics 3D printing from Vitali Stanila on Vimeo.
esba TALM Organization & Material : EZCT Architecture & Design Research® Robot software : HAL® Not much information is found...
Jared Friedmand in collaboration with Olga Mesa and Hea Min Kim Project Abstract: The Standard definitions and models of additive...